Base: Solvent
Primary Use: Stamped Concrete/Exposed Aggregate
CRYSTAL 1315 HF is a breathable, acrylic copolymer curing and sealing compound designed for use on new or existing concrete and plain or decorative surfaces. CRYSTAL1315 HF forms a tough, non-yellowing, high-gloss, vapor permeable (breathable), transparent film on the concrete surfaces that retains mixing water for maximum curing and provides excellent abrasion resistance for long-lasting protection.
Base: Solvent
Primary Use: Stamped Concrete/Exposed Aggregate
Aggreseal Supreme is a high gloss, UV resistant solvent based acrylic sealer. Aggreseal Supreme offers improved resistance to rain, the sun, freezing temperatures, stains, and other pollutants that sometimes can be hazardous to the concrete.
Base: Solvent
Primary Use: Stamped Concrete/Exposed Aggregate
Super Diamond Clear is a solvent-based curing and sealing compound specially designed to cure new concrete, assuring proper cement hydration and strength gain, while providing a non-yellowing seal to protect and enhance the appearance of concrete. Super Diamond Clear is particularly suited for curing and sealing exterior architectural concrete, where membrane yellowing is undesirable.
Base: Water
Primary Use: Interior Decorative/Acid Stain
LUMISEAL FX is a high solids, water-based, non-yellowing, blush resistant curing and sealing compound. When used as a sealer, LUMISEAL FX is designed to provide an attractive medium gloss finish on concrete substrates. LUMISEAL FX is formulated with advanced, self-crosslinking emulsion chemistry, providing a very durable film and excellent early water-resistance to whitening or blistering.
Base: Solvent
Primary Use: Exterior Plain Concrete
Spray-Cure & Seal 25 is a non-yellowing copolymer, membrane forming curing and sealing compound for concrete. It is a solvent-based product to be used outdoors only. Spray-Cure & Seal 25 produces a medium gloss, clear, continuous film which effectively cures fresh concrete and protects concrete surfaces from intrusion of water, waterborne contaminants and dirt.
Base: Solvent
Primary Use: Exterior Plain Concrete
Cure & Seal 25% J22UV is an acrylic copolymer cure, seal and dust proofing compound in an aromatic solvent containing 25% solids with special U.V. stabilizers. The higher acrylic solids content will form an excellent surface coating with a high gloss finish and will provide an outstanding cure performance.
Base: Solvent
Primary Use: Exterior Plain Concrete
2500 LV UV is a UV resistant, low viscosity 25% solids solvent based acrylic curing and sealing compound, as well as a dust-proofer for concrete surfaces. 2500 LV UV offers improved resistance to rain, the sun, freezing temperatures, stains, and other pollutants that can often be hazardous to concrete. 2500 LV UV forms a moisture retentive film on freshly placed concrete.
Base: Water
Primary Use: Exterior/Interior Plain Concrete
Safe-Cure & Seal 309 is a water emulsion, styrene acrylic copolymer curing and sealing compound. Safe-Cure & Seal 309 is low-odor, produces a medium gloss film, cures fresh concrete to ASTM C309 standards, protects concrete surfaces from the intrusion of water borne contaminants and dirt, and is a low Volatile Organic Compound (V.O.C.) water-based product.
Base: Water
Primary Use: Exterior/Interior Plain Concrete
Cure & Seal 309 J18 is a water based acrylic copolymer that offers a combination curing, sealing and dustproofing for freshly finished concrete surfaces. This product dries to produce a non-yellowing, durable, clear film on concrete.
Base: Solvent
Primary Use: Heavy Duty Sealing/Oil & Grease Resistant
Traz 25 is a high solids, high performance concrete curing & sealing compound. Traz 25 is formulated with methyl methacrylate polymers that develop high gloss and are more chemically resistant than standard acrylic sealers. Traz 25’s film will not yellow under any UV conditions and is extremely durable.
Base: Solvent
Primary Use: Heavy Duty Sealing/Oil & Grease Resistant
Tuf Seal J35 is a scientifically formulated clear, non-yellowing sealer comprised of methyl methacrylate polymers. It dries to a durable, high gloss finish that not only protects, but also beautifies floors. Tuf Seal J35 is designed to provide protection from oil and gasoline and excellent resistance to oils, greases and weathering.
Base: Water
Primary Use: Driveways/Garage Floors/Exterior Concrete
CHEMSTOP WB HD is a water-based, ready to use, siloxane/silane water repellent. CHEMSTOP WB HEAVYDUTY is used on porous surfaces such as light weight concrete, concrete block and mortar joints.
Base: Solvent
Primary Use: Driveways/Garage Floors/Exterior Concrete
BARACADE SILANE 40 is a breathable, ready-to-use, colorless, non-staining, non-yellowing, deep penetrating concrete and masonry water repellent compound. It protects concrete, block, stone and brick against the damaging effects of water intrusion, deicing chemicals, freeze-thaw exposure and airborne contaminants such as acid rain, smog and industrial fumes.
Base: Water
Primary Use: All Concrete/Commercial Floors
AQURON 2000 Cure and Seal offers a proven solution to water migration in concrete. It is an effective treatment that is aqueous-borne, penetrating sub-surface densifying, and molecular bonding.
Base: Water
Primary Use: All Concrete/Commercial Floors/Polishing
Consolideck LS is the premium hardener, densifier and sealer for concrete surfaces. This penetrating lithium silicate treatment reacts with the concrete to produce insoluble calcium silicate hydrate within the concrete pores. Treated surfaces resist damage from water and surface abrasion. The increased surface hardness reduces dusting and simplifies maintenance, producing a cleaner, healthier environment.
Base: Water
Primary Use: All Concrete/Fresh Floors
Consolideck LS/CS is a penetrating silicate treatment that reacts with the concrete to produce insoluble calcium silicate hydrate within the concrete pores. LS/CS is appropriate for freshly troweled “green” concrete, or existing floors of any age and renders concrete floors dustproof.
Base: Water
Primary Use: Commercial Interior Floors
Ashford Formula, a leader in concrete densification since 1949, is a transparent, chemically reactive, water-based treatment that penetrates concrete and masonry building materials, protecting, preserving and strengthening them permanently.
Base: Water
Primary Use: Commercial Interior Floors
SEAL HARD is a proprietary, chemical hardening solution that is formulated to increase the wear resistance and surface strength of concrete floors that have been mechanically ground, smoothed, and polished. SEAL HARD penetrates diamond ground and polished concrete wear surfaces to harden, seal, and densify.
Base: Water
Primary Use: Commercial Floors/Polishing
Ameripolish® 3D (3 densifiers in one product) Hybrid Silicate Densifier improves surface performance and resists the harmful effect of traffic wear and weathering. By having 3 different size molecule silicates this product fully penetrates varying densities of concrete regardless of region or hardness. This improves the abrasion resistance for new or aged concrete.
Base: Water
Primary Use: M-DOT Projects
Safe-Cure 1000 is a water-based, white pigmented wax emulsion curing compound for freshly placed concrete.
Base: Water
Primary Use: M-DOT Projects
Safe-Cure Clear DR is a clear, water based resin curing compound for concrete. Safe-Cure Clear DR efficiently cures concrete and then decomposes rapidly when exposed to ultraviolet, sunlight, and abrasion.